Western-digital My Net AC1300 Router User Manual Instrukcja Użytkownika Pobierz pdf (Strona 32)

ADVANCED SETTINGS

MY NET AC1300 ROUTER

USER MANUAL

Default Gateway The IP address of the device to which your router is

connected.

Primary DNS Server/Secondary DNS

Server

The primary and secondary DNS Server addresses are

configured and maintained by your ISP. Contact your

ISP for this information.

Internet Setup Screen

Purpose: Configure your Internet connection type.

MTU (Maximum Transmission Unit) Size (in bytes) of the largest protocol data unit that can

be transmitted over the network. The default value is

1500.

MAC Address Identification number assigned to the router by the

manufacturer.

Note: With some ISPs, you may have to set the MAC

address to match the MAC address of your previous

router.

Clone Your computer’s MAC Address button:

Copies the MAC address of the computer that are you

currently using into the MAC address field. This allows

the router to present your computer's MAC address to

your ISP.

Primary/Secondary DNS Server The primary DNS Server is the first DNS server you

want to use. For DHCP connections, this is optional. If

you enter a primary DNS server when using DHCP, it

will override your ISPs DNS server. The secondary

DNS Server is the one that will be used if the primary

DNS server is not reachable. This field is optional.

If Internet Connection Type is: PPPoE, PPTP, or L2TP (Username/Password):

Address Mode Select to assign the router either a static or a dynamic

IP address.

Username Username for accessing the ISP.

Password/Verify Password Password for accessing the ISP.

Service Name Your ISP configures and maintains the Service Name.

Contact your ISP for this information.

Reconnect Mode Select one of the reconnect modes for your PPPoE,

PPTP, or L2TP connection:

• Always On – Your Internet connection will remain

connected and reconnect if there is a

disconnection from the server.

• On Demand – Your Internet connection will

disconnect after the Idle time has passed. The

connection will automatically reconnect when a

client attempts to access the Internet.

• Manual – You can connect or disconnect the

Internet connection on the Internet Status page.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 76 77

Komentarze do niniejszej Instrukcji

Brak uwag

Western-digital My Net AC1300 Router User Manual Instrukcja Użytkownika Strona 32

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Western-digital My Net AC1300 Router User Manual